NJP-2200/3200_Filling Machine_产品中心-Liaoning Tianyi Machinery Co,Ltd

NJP-2200/3200 AUTOMATIC HARD CAPSULE FILLING MACHINE

This machine is designed scientifically and logically with frame structure. Drop the location of transmission part gravity to make sure high speed run smoothly. The main axis is designed much more thickness to plus the torsion. That makes bearing capacity stronger.

Main Technical Data

Model	NJP-2200		NJP-3200
No.of die orifice	19(双排)		23(双排)
Max output(capsule/hour)	132000		192000
Vacuum	-0.08～-0.04 Mpa
Capsule number	00#-5#; (safety A,B)
Filling percentage	≥99.9%
Filling difference	<±3
Idle load noise dB(A)	<73
Power	380V 50HZ 8KW	380V 50HZ 10KW
Size LWH(MM)	1200×1070×2100	1420×1180×2200
Weight (kg)	2500	3000
*Data printing function，pellet device, dry vacuum pump or IPC control (for your choice). Re: No additional information noted if there is any changed caused by the technical development.

Automatic switch-over and control the capsule blanking and decrease manually operation.
Division box of RU180 which make sure steady and accurate transmission.
Adopt needle brush blowing clean way to avoid leaving more powder.
Arrangement mode of back and forth misplacement mould could improve the filling accuracy of power.