The machine has the reasonable design , novel structure.Equipped with automatic feeding system、packing testing、plate cooling integral、waste recycling and other devices, can automatically complete the package material feed, blister molding, drug filling, packing testing, heat sealing, batch number, indentation, blanking, scrap plate rejection, finished product output and other process. The production process is intuitive, easy operation and maintenance, complete functions.
1.Machine using PLC automatic control system, frequency control, high degree of automation. The main electrical components are used internationally renowned brands.
2.The spline shaft of the forming mechanism, the sealing mechanism, the typewriting mechanism and the arbitration mechanism are all divided into three sections, single drive way, so as to improve the bearing capacity of the spline shaft, greatly improve the production efficiency and quality of the plate sealing, machines in operation process more smoothly and reduce the noise. Make the maintenance more convenient at the same time,reduce the working intensity and improve working efficiency .
3. The forming mechanism, the sealing mechanism, the typewriting mechanism and the punching mechanism are all installed on the base of the guide rail, High positioning accuracy , move and adjust the position is convenient and accurate.
|Max Cutting Frequency(cuts/min)||50 cuts/min|
|Max Forming Area（mm）||160×250|
|Max Forming Depth||26|
|Packaging Material（mm）||PVC/PVDC 260×(0.25～0.35)|
|Air Consumption （L/min）||35|
|Power||380V 50HZ 12KW|
|Re：No additional information noted if there are any changed caused by the technical development.|
Sealing device adopts double pressurized cylinder , ensure the quality of platesealing .
Batch number printing device with heating function , can make the batch number is more clear and beautiful.
On the up blanking mould with a finished product push board device , make the finished product will not stranded in the cavity mutual extrusion , prevent product damage and waste.
PVC and PTP are inflatable shaft fixed, can quickly replace the packaging material.
Main motor rear, easy to lubricate and maintain, reduce pollution.
The traction of the packing material is realized by the ball screw and the synchronous belt,the stroke is accurate and the error is reduced effectively.
Adopts servo motor drawing method , easy to adjust , traction schedule accurately , drawing can travel between 20-160 mm , expand the scope of the machine.
Add：Liucheng Street, Chaoyang City, Liaoning Province